If the Clutch Cable is broken, people can replace it by themselves. Ningbo Kunpeng Auto Industry Co., Ltd. will share how to do it today.
1. You need to open the hood of the car first, use a ratchet wrench that matches the model, and remove the coolant bottle of the car first. Then you can see the fixing screws of the Clutch Cable and remove the fixing screws.
2. After removing the fixing screws, you need to remove the screws on the car clutch paddle that fix the car clutch cable.
3. After removing all the screws, you need to open the clutch pedal in the car, remove the Clutch Cable clip, remove the screw that fixes the middle screw, and then remove the screw that fixes the cable head.
4. At this time, after removing the screws, you can directly push out the clutch cable from the back. At the same time, install the prepared new cable back along the original route.
It should be noted that if you find that the clutch cable is broken while driving, if you are on a steep road, you can back up the car to the bottom of the slope and then start again. After driving out of the main road, stop in a safe place immediately and wait for the car to be repaired before continuing to drive. Do not force it to avoid accidents.
Finally, if you are not sure how to replace the cable, it is recommended that you try to go to a 4S store and let professionals replace it.
